pall微生物檢測濾膜66191
pall微生物檢測濾膜66191參數(shù)
孔徑
0.45 微米
Typical Thickness
152 µm (6 mils)
Typical Filter Weight
4 mg/cm2
Typical Water Flow Rate
> 65 mL/min/cm2at 0.7 bar (70 kPa, 10 psi)
Maximum Operating Temperature – Water
74 °C (165 °F)
Typical Moisture Pick-up
< 1% after 24 hr at 48% relative humidity at 23 °C (73 °F)
Extractables - Boiling Water
< 2%
Minimum Bubble Point - Water
1.8 bar (180 kPa, 26 psi)
pall微生物檢測濾膜66191訂購信息:
Part Number | Description | Pkg | |
GN-6 Metricel Membrane, 0.45 µm (S-Packs) | |||
66265 | 47 mm, plain, sterile | 200/pkg | |
66278 | 47 mm, grid, sterile | 200/pkg | |
66068 | 47 mm, grid, sterile | 1000/pkg | |
66191 | 47 mm, grid, sterile | 2000/pkg | |
66539 | 50 mm, grid, sterile | 200/pkg | |
60016 | 85 mm, grid, sterile (not individually packed) | 50/pkg
|
性能
混合纖維素酯可zui大限度提高微生物截留率和復現(xiàn)率
過濾介質:親水性混合纖維素酯 孔徑:0.45μm
標準水流速:65ml/min/cm2 at 10psi 標準重量:4mg/cm2
zui大操作溫度-水:26psi
屈光度:1.152
消毒方法:可高溫高壓滅菌:單獨包裝產(chǎn)品經(jīng)伽瑪射線滅菌